Description
*THIS ADAPTER WILL NOT FIT ALL NERF TWIST LOCK ACCESSORIES. It is specifically made for our suppressor/flash nozzles like the Nerf Spectre suppressors.
DETAILS:
Designed specifically for Nerf Barrel Extensions like the one shown.
COLORS:
– Black
– Blue
– Orange
INCLUDED:
– (1) Barrel Extension Adapter
– (2) End Caps
– Hardware
DIMENSIONS:
2.87 in L x 1.87 in DIA | 72.9 mm L x 47.5 mm DIA
TOOLS REQUIRED:
You’ll need a small Phillip’s head screwdriver.
INSTALLATION:
*ADVANCED ACCESSORY: Requires blaster disassembly.
- Remove the 6 Phillips head screws in the barrel extension.
- Separate the barrel extension halves just slightly in the front where the front sight is. Be careful not to separate them too much or the tension springs may fall out.
- Remove the front sight assembly and reconnect the two halves back together.
- Reinstall the 4 of the 6 original screws in the bottom part of the body of the barrel extension and tighten snug.
- Place the adapter from the kit inside the outer cap by lining up the boss in the adapter with the socket in the outer cap. Make sure the larger of the bolts is face upward.
- Line up the two screw holes from the outer cap with the ones in the barrel extension and slide the assembly on from the right side.
- Place the other half of the outer cap on the remaining side and tighten down the two Phillips head screws.
