AF Spectrum Thumbhole Brace Stock

Description

PRODUCT DESCRIPTION:
Fed up with the wobbly shoulder stock that comes with the Adventure Force Spectrum. So were we, check out our new thumbhole replacement shoulder stock for the Spectrum. It attaches at two  locations, topside on standard stock adapter and also at the bottom of the grip. Our design is much stronger and has a more secure feel to it. In addition, the pad on the back side is removable just in case we come up with new design, it can be easily swapped out for another design.

There are some tools necessary to install our stock, for example you will need a drill or rotary tool, a 1/8″ drill bit for marking, a 5/64″(or 2mm) drill bit , a 3/32″ hex key and a small Phillip’s head screw driver. The process should only take about 5 to 10 minutes. You can follow along in our “AF Spectrum Thumbhole Installation Guide” video on our You Tube page.

The stock comes in a variety of color combinations, mostly to complement the standard colors the Spectrum comes in. However if you need some special colors for your stock just add the custom color listing to your purchase and you will have the choice of picking your own colors.

If you carry your primary weapon on a sling, it even has a connection point on the rear of the stock.

COMPATABILITY:
The AF Spectrum Thumbhole Brace Stock has been specifically designed for the AF Spectrum and will not fit any other blaster without significant modifications.

INCLUDED:

• Thumbhole stock
• Hardware Included
• Tools Required (NOT INCLUDED)

DIMENSIONS: 
11.12 in. L  x  2.25 in. W  x  7.16 in. H  |  282.4 mm L  x  57.15 mm W  x  181.8 mm H

TOOLS REQUIRED:

• 3/32″ Hex key
• 1/8″ Drill bit – for marking
• 5/64″ or 2mm Drill Bit
• Drill or Rotary Tool
• Small Philips Head Screwdriver
• Installation Guide is on our You Tube page

INSTALLATION:
Please follow our installation guide on our You Tube page